The article will explain what the settings on the Simple Motion Sensor are, what they do, and how to change them. Let's get into it!
About your switch
This switch has 3 settings and each setting has 2 options.
The duration of time the switch turns off after not detecting any motion.
- 10 minutes
- 20 minutes
How you want the sensor to trigger the light
- Occupancy (OCC) - the switch turns on when it detects motion and turns off after it no longer detects motion for the time period set
- Vacancy (VAC) - the switch turns off after it no longer detects motion for the time period set
How sensitive the sensor is to movement
Changing your settings
1. Remove the cover
Pull outward at the top middle of the switch to release the switch cover.
2. Adjust your settings
Select your Time and Mode settings. Please keep range set to Low.
3. Replace the cover
Align the two flat pieces on the bottom of the door with the slots right above the sensor. Then, push the cover in until it clicks and secures.