The LED icons on a Deako Smart Scene Controller Switch or Dimmer will light up throughout the setup process, here’s a breakdown of what each icon means.
What do you see?
1 icon is on: ready to pair or link
The switch is indicating it is ready to be paired to your app or linked to another switch in a multi-way. If you aren’t trying to do either of those things, you can tap the three little boxes in the upper left to exit this mode.
1 icon is flashing, 2 icon on: linking mode
Linking mode is part of the process of connecting multiple switches. (See Installing a Set of Switches) To exit this mode, tap the three little boxes in the upper left to exit.
3 is on: factory reset mode
Factory resetting is just a fancy way of saying your switch will go back to the way it was when it came out of the box. To exit this mode, tap the scene menu in the upper left. To continue with the factory reset, check out Factory Reset a Deako Switch.
Trying to get to linking mode?
Hit the scene menu in the upper left to exit factory reset mode and then try again. See Installing a set of Deako Switches for complete linking instructions.
1, 2, and 3 icons pulsing: pairing or linking
This means the switch is in the process of pairing to your app or linking to another switch. To exit this mode, hold down the switch for about 6 seconds.
Scene menu icon: scenes assigned to switch
This means you have 1 or more scenes assigned to the switch. Tap the scene menu to bring up the 1, 2, and/or 3 icons and tap any of them to execute the corresponding scene. If you see this when attempting to link a switch to another switch, you will likely need to factory reset the switch before continuing.
Didn’t mean to assign scene(s) to this switch?
Edit the scene in your app to change what switch (if any) you’d like it assigned to.
Don’t want the scene menu to show up?
Navigate to the home page in the Deako app. Tap Edit in the upper right, then tap the arrow to the right of the switch, then set Toggle Kebab to off.
Trying to link your switches and see the scene menu after holding down your switch?
Your switch thinks it has already been linked! Try factory resetting your switch and starting again.