Deako Smart Switches and Smart Dimmers communicate with each other using Bluetooth. The Deako Connect allows your switches to communicate through WiFi, adding more advanced features such as remote access and integrations with other smart home devices.
Before you begin...
- Add your switches to the Deako App
- Make sure Bluetooth and Location Services are enabled on your mobile device
- Make sure your mobile device is on the same WiFi network that you will be using for the Deako Connect
- Check what version number your Connect is
Setup a Connect
Plug in the Deako Connect
Plug in the Deako Connect near your router. Give the Deako Connect 45 seconds to boot. Learn more about the LEDs on your Deako Connect.
Open WiFi Settings setup in the Deako app
Open the Deako App and tap the gear icon at the top left corner. Then select WiFi Settings.
Setup your WiFi
Tap Set up now. Continue through the in-app instructions to complete the setup.
LED Indicators for the V1 Deako Connect
| LED appearance | Indication |
|---|---|
| Solid blue | Boot up complete |
| Blinking white | Ready to connect |
| Blinking blue | Connecting to Bluetooth |
| Blinking green | Connecting to WiFi |
| Solid green | Successfully connected to WiFi |
LED Indicators for the V2 Deako Connect
| LED appearance | Indication |
|---|---|
| Solid green | Boot up complete |
| Blinking blue | Connecting to Bluetooth |
| Blinking white | Connecting to WiFi |
| Solid white | Successfully connected to WiFi |
| Solid purple | Receiving a software update |
Not sure what version you have?
Check the sticker on the back of your Deako Connect (right above the power plug-in) or contact support@deako.com for assistance.
Having trouble?
Check out Troubleshooting your Deako Connect