Deako integrates with Alarm.com through the Qolsys IQ Panel 2+. Follow these instructions to discover your Deako devices and add them to your system.
1. Run through the IQ Panel 2+ Installation Wizard
Ensure that you are connecting to the same 2.4 GHz wifi as the Deako Connect or Smart Switch
2. Swipe down from the top center of the screen and select Settings
3. Select Advanced Settings
4. Enter User Code: 2222
5. Tap Installation
6. Select Dealer Settings
7. Scroll down to Other Automation and tap the box on the right to select and enable.
8. Exit Dealer Settings by hitting the back arrow in the lower left, then tap Devices
9. Select Automation
10. Select Auto Learn Devices
Deako devices will automatically be found by the IQ Panel 2+